Phone: 008613602071763 
E-mail: keven@mskcnctools.com
A threaded pump barrel tool is the perfect way to draw liquid out of a reserovore. This contraption comprises of a cylindrical barrel capped with a rotatable thread. As the screw is twisted in its threads, negative pressure builds within creating a vacuum that suctions the mouth-watering liquid up through the top.
To dissemble the threaded pump barrel tool, one should kick off the process by taking away the screw that rests on the cap of the pump barrel. Then, undoing the barrel from the pump body is necessary. To wrap up, take away the O-ring located at the bottom of the barrel.
The threaded pump barrel tool is composed of four distinct components: barrel, screw, pump body, and O-ring. At the base of the system lies the barrel, a vessel designed to contain the liquid. It is then actuated by a screw which is rotated in order to generate suction thereby pulling the liquid up and out of the chamber. The subsequent component, the pump body, links the barrel to the other elements of the pump. Finally, an O-ring – a rubber seal – is present at the base of the barrel and serves to fasten it with the pump body.
To take the threaded pump barrel tool apart, begin by unscrewing the screw at the top of the barrel. Next, unfasten the barrel from the pump body. After that, remove the O-ring from the base of your barrel. Finally, extract the barrel from its setting inside of the pump body.
