pipe threader tools

An indispensable tool for plumbing professionals, a pipe threader is capable of generating screw threads on the inner part of pipes or re-threading those that have been cut. These tools come in either manual or powered drill versions and are essential for cleaning out worn threads and reviving broken pipes.

Knowing the dimensions of your pipe is the first step when it comes to threading it. Common sizes are ”, ”, and ”. Following this, choose the appropriate die head that fits your pipe threader – be sure to properly install it before using the tool.

Firing up the pipe threader is easy. Firstly, slot the cutting tool into the die head. Then while applying pressure to the cutting tool, slowly revolve the handle of the threader in a clockwise motion. As you continue to rotate, threads will start to be fashioned on the inside of the pipe. Keep spinning until one full rotation is completed.

After a single revolution from the cutting tool, take it out of the die head and use the reaming tool to replace it. Carefully turn the pipe threader counter-clockwise, simultaneously applying pressure to the reaming tool. As you exercise control over the handle, it will polish the freshly cut threads. When the reamer has completed a full rotation, remove it and reinstate the cutting tool in its place.

Steadily rotate the handle of the pipe threader in a clockwise motion while pressing the cutting tool firmly against the circumference of the pipe, making sure contact is made along its entirety. After one full spin of the cutting device, take it out of the die head and switch it for the reaming tool.

After making a full rotation, take the reaming tool out of the die head and replace it with the tap tool. Carefully spin the pipe threader’s handle in a clockwise direction, while applying pressure to the tap tool. As you keep twirling the handle, the tap tool will form screw threads on the inner surface of the pipe. When the tap has gone around once, switch out the cutting tool for removal from the die head.

To use the pipe threader, keep twisting the handle in a clockwise direction with your strength behind the cutting tool, ensuring that it touches the rim of the pipe as you go. Once the cutting tool has spun around in a full circle, take it out of the die head and substitute it with the reaming tool.

Once your reamer has rolled through a full turn, take it away from the tool and insert the head into the pipe. With a slow but heavy spin of your pipe-threader’s handle, the head will carve the interior of the pipe with its grooves. After its one whole rotation is complete, remove it and reset with the cutting tool.

Ensure that the handle of the pipe threader is rotated in a clockwise motion, applying a consistent pressure to the cutting tool throughout. As you spin the tool, affirm that it makes contact with every inch of the pipe’s circumference. When the cutting tool has completed a full rotation, remove it from the die head and place back in the reaming tool.

Upon one full rotation of the reaming tool, take it out of the die head and insert the tap tool. With steady increased pressure, rotate the handle of the pipe threader in a clockwise fashion. As you go, the tap tool will begin to craft threads inside the pipe. After a single revolution, remove it and trade it out for the cutting tool.

Gradually rotate the pipe threader handle leftward in a clockwise direction, pushing firmly against the cutting instrument. Ensure that the entire circumference of the pipe is being touched by the cutting instrument. Once it has completed one full loop, lift it out of the die head and slide in the reaming tool.

After one entire turn of the reamer, eliminate it from the die holder and insert the cutting tool in its place. Carefully rotate the pipe threader’s handle in a clockwise direction as you steadily apply force against the cutting tool. Continuing to spin the handle, the cutting tool will etch screw threads internally into the tube. Once this has been accomplished following one full turn of the cutting tool, remove it from the die head and exchange it for the tap tool.

To complete the threading of your pipe, you will need to turn the handle of the threader in a clockwise motion. Ensure you apply a steady pressure to the tap tool while moving it. Make certain that you are taking all the necessary steps for a successful process: rotation, pressure, firmness. This will ensure your threading process is executed properly and with precision.