For those that must install a threaded insert onto a workpiece, the best tool for the job is a rivet threaded insert tool. You may select between several different types and sizes to best suit your project; however, the most frequently used device among professionals and hobbyists alike is usually a hand-held rivet gun. These rivet guns are available as both pneumatically powered and manual versions. The pneumatic version often offers quicker operation and require less effort than its manual counterpart, although the latter should be used without access to air compressors.
Threaded inserts can be affixed quickly and easily with a rivet threaded insert tool. Start by inserting the insert into the tool, then position the tool over the relevant hole in the workpiece. When ready, operate the tool simply by pulling its trigger. This will drive the insert securely into the hole and fasten it in place.
Installing a threaded insert with a rivet tool can be a delicate job, so take care to keep the following points in mind. Firstly, make sure you are using the correct size tool for your insert – undersized tools won’t do the job properly. Secondly, be aware that if you overtighten the insert, it may result in threaded damage, making the insert tricky to remove in the future. Finally, when using the tool make sure to always wear protective eyewear, as an incorrectly inserted insert can be forcefully ejected with great force.
If you need to insert threaded inserts quickly and with precision, it can be beneficial to consider a hand-held rivet gun. Coming in either pneumatic or manual configurations, these tools are dependable and simple to employ; facilitating efficient install of riveted threaded inserts on the job.