A rivet is an indestructible structure used to attach separate entities together. Its round head and pointed tip make it ideal for application to secure two materials in unison. To fasten the rivet, the sharp tip is pushed through one of the components, while the wider head is hammered on the opposite side, resulting in widening of the stem which imposts a reliable bond between them.
Metal and plastic rivets can be used for a variety of jobs, each having its individual pros and cons. Metal rivets are usually sturdier and reliable, yet difficult to install when compared to plastic rivets which are simpler to manipulate. When dealing with metal rivets, two categories exist: split rivets which favor accessibility over hold strength; and solid rivets which prioritize strength over installation complexity.
The installation process for a rivet begins with the pre-drilling of the material. The bore should be just a pinch smaller than the rivet’s diameter. Once done, place the rivet through the hole, ensuring that its head stays on the side which will receive hammering. The nead should also extend beyond the other side of the opening.
To ensure the stability and security of the rivet, the data requires the head to be hammer until it is in line with the texture of the surface. Through this process, the tip of rivet will swell, enabling it to retain its place. To finalize its installation, trim off any excess remaining after the process.
Requiring a robust union, yet dealing with too slender or overly substantial material? A threaded rivet could be the answer. This unique rivet type features threads near its summit, fashioned for exactly those instances when a solid rivet proves inadequate, or a split one is unworkable.
Insertion of a threaded rivet begins with the boring of a small hole into the material to be secured. Care must be taken to ensure the diameter of the bore is fractionally smaller than that of the rivet being used. With the hole drilled, the rivet is placed so the head faces the side you intend to strike. The purpose of this action is to ensure the threaded portion of the rivet extends from the opposite side of the aperture.
To complete the riveting process, use a hammer to make the head of the rivet level with the material. Thump away until you feel the threads bite into the surface. Trim off any loose ends after that for a flawless finish.